Features
36 V input voltage range Dual fixed V/5 V and 3.3 V outputs or adjustable 5.5 V and 2.5 V outputs, ± 1.5% accuracy over valley regulation Low side MOSFETs’ RDS(on) current sensing and programmable current limit Constant ON-time control Frequency selectable Soft-start internally fixed 2 ms and soft-stop Selectable pulse skipping at light loads Selectable minimum frequency (33 kHz) in pulse skip mode Independent power good and EN signals Latched OVP and UVP Charge pump feedback Fixed V, or adjustable output 1.5 % (LDO): 3.3 V reference voltage 2.0 V reference voltage 5 mm
Description
is a dual step-down controller specifically designed to provide extremely high-efficiency conversion, with lossless current sensing technique. The constant on-time architecture assures fast load transient response and the embedded voltage feed-forward provides nearly constant switching frequency operation. Pulse skipping technique increases efficiency at very light load. Moreover, a minimum switching frequency of 33 kHz is selectable to avoid audio noise issues. The PM6686 provides a selectable switching frequency, allowing three different values of switching frequencies for the two switching sections. The output voltages OUT1 and OUT2 can be programmed to regulate V/5 V and V/3.3 V outputs respectively or can deliver two adjustable output voltages. An optional external charge pump can be monitored. This device embeds a linear regulator that can provide or an adjustable voltage from 4.5 V output. The linear regulator provides to100 mA output current. LDO can be bypassed with the switching regulator outputs or with an external power supply (switchover function). When in switchover, the LDO output can source to 200 mA.
